1000 AUGER force

Click on image to enlarge

	High performance auger fed filling/weighing machine
	Microprocessor controlled with twin load cell accuracy
	Two speed 'fast' and 'slow' auger filling
	Automatic product in flight correction facility
	Valve neck sealing for an environmentally cleaner fill
	Main hopper product agitation
	Non influencing valve spout or open top sack filling
	Weighing range: 5kg - 50kg

The sack is placed over the valve spout (manually or automatically). On pressing the start fill, the valve inflation ring will expand to create a dust tight seal. Product will be discharged into the sack via a two speed 'fast' and 'slow' auger. The auger feed will stop at the chosen target weight then shift into reverse momentarily in order to reduce after spill when removing the sack.

Height: 1500mm, Width: 720mm, Depth (front to back): 1440mm

Weighing range:	Filling range: 3kg to 50kg
Filling rate:	4 per minute average @ 25kg density 1000kg per 1 cubic metre
Accuracy:	0.5% of target weight (depending on product)
Power requirement:	240v 16amp single phase neutral and earth
Air requirement:	6 bar @ 2cfm
Gross weight:	175kg (empty)

	Epoxy coated main frame.
	Inflation ring on valve spout complete with gauge.
	Twin 100kg R60 approved load cells.
	Product agitation in main hopper.
	Lugs on main frame to aid fixing to the floor.
	Easy to use weigh indicator and controls.
	Inverter controlled 'fast' and 'slow' auger speed.
	Auto reverse on auger at weight complete to reduce spillage.

	Stainless steel contact parts.
	All stainless steel construction.
	Trade approved R61 weigh controller.
	Side access panel to aid cleaning (interlocked)
	Twin filling head version.
	Automatic sack placer (placing on machine).
	Automatic sack discharge.

Non influencing valve spout, with inflatable valve seal for a cleaner environmental fill.

Please click here to down load .pdf brochure of Simplafill Systems 1000 AUGER force (284 K).

UK and Overseas Agents Required, please contact us for further information...